Beveling machine Chamfering machine
These machines are installed off line in finishing zone as auxiliary machines for chamfering ( End facing ) pipe ends to shape required and size after pipe cut off by flying saw cutting machine or flame cutting device or milling machine etc.
They are divided into large diameter and small diameter type and single or multi-working position types.
Heads fast move in and slowly approaching design.
Head cutter can be adjustable for pipe end shape angles required.
?
Large diameter machine?composed:
Mainly divided into pipe charge/discharge table at beveling machine both side, main disc heads of beveling machine which set opposite, pipe supporting or holding devices etc.
?
Small diameter machine?composed:
Beveling heads opposite, walking beam devices, clamping devices, hydraulic system or mechanism to move head electric control system etc.
?
The angle and profile be conformed to API standard and can meet customer requirements.
Specification as list for reference:
|
END FACING & BEVELING MACHINE |
|||||||
|
No. |
MODEL |
Dia. of pipes mm |
Wall thickness mm |
No. |
MODEL |
Dia. of pipes mm |
Wall thickness mm |
|
1 |
ZHPT-01 |
Φ13~φ25 |
0.3~1.5 |
10 |
ZHPT-010 |
Φ219~φ610 |
4~19 |
|
2 |
ZHPT-02 |
Φ25~φ50 |
0.4~3 |
11 |
ZHPT-011 |
Φ219~φ820 |
3~12.7(14) |
|
3 |
ZHPT-03 |
Φ33~φ76 |
0.7~3.5 |
12 |
ZHPT-012 |
Φ219~φ920 |
3~14(16) |
|
4 |
ZHPT-04 |
Φ76~φ114 |
2.5~6(10) |
13 |
ZHPT-013 |
Φ219~φ1020 |
3~14(16) |
|
5 |
ZHPT-05 |
Φ76~φ168 |
2.5~8(10) |
14 |
ZHPT-014 |
Φ426~φ1420 |
3~16(18) |
|
6 |
ZHPT-06 |
Φ114~φ219 |
3~10(13) |
15 |
ZHPT-015 |
Φ508~φ1820 |
4~20(25) |
|
7 |
ZHPT-07 |
Φ114~φ325 |
3~10(14) |
16 |
ZHPT-016 |
Φ508~φ2400 |
4~25 |
|
8 |
ZHPT-08 |
Φ140~φ406 |
4~12.8(16) |
17 |
ZHPT-017 |
Φ508~φ3000 |
4~25 |
|
9 |
ZHPT-09 |
Φ219~φ508 |
4~16 (19) |
? |
? |
? |
? |
晉公網安備 14010702070482號