C 80-300 purlin roll forming mill

On the machine can rolls many sizes C section in a complex roller set. Consist of power free de-coiler, leveling machine, punching unit if needed punching holes on line, forming machine, cutting device, hydraulic station, electric control system etc. Automatically punching holes and cutting achieved.

?

Main specification：

Dimension: L*H*W 7600mm，950mm,1000mm；

Machine motor power: Hydraulic power: 11KW each.

Roller steel brand: GCr15;

Machine base structure: 320 I beam structure welded;

The leveling machine: Bottom 5/ Top 4 leveling rollers;

C section thickness to be rolled: 1.5mm-3mm (Also can supply machine as per client inquiry)

C section size range: 80mm-300mm

Rolling speed: 8-9m/min；

?

Z section roll forming mill

On the machine can rolls many sizes Z section in a complex roller set. Consist of power free de-coiler frame, leveling machine, punching unit if needed punching holes on line, forming machine, cutting device, hydraulic station, electric control system etc.

?Automatically punching holes and cut to length achieved.

?

Main specification：

Dimension：10000×2400×1400mm

Electric control system: by PLC control for full machine

Main motor power：11KW

Power of hydraulic cutting ：15KW

Rolling speed：About 9m/min

Hydraulic station working pressure：18-20Mpa

Z profile size range：100-300mm

Wall thickness：1.5-3mm

?

?

Brief introduction of C/Z profile interchangeable rolling machine

?

C section, Z section each sizes rolling can be achieved full automatically size change in a minute.

Between C80-300、Z120-300, any size can be rolled with wall thickness: 1.5-3.0mm

Automatically rolls each sized C and Z profiles on a device which equip with a set of roller and in a very simple roller change way, and all actions that Auto-punching holes, forming and cutting according to preset date for products length, holes span, quantities.

?

Within 5 minutes, the C /Z profile change can be done easily in any sizes.

Operating easy, less persons working, time save and high productivity.

?

The machine consist of guiding device, leveling device, 3 sets of hydraulic hole punching devices, hydraulic cutting device, fast roller change type forming mill, electric control system, hydraulic system etc.

?

Fill forming mill line is driven by a motor with frequency convert, reducer to control rolling, cut to length, positional.

Running speed: 20m/min.

?

Main specification

? ? 1）The profile wall thickness：3mm Max.

? ? 2）Adjustable distance for punching holes in cross: 40~300mm

? ? 3）Total motor power: 25KW

? ? 4) Max. forming speed: 20m/min

? ? 5) Hydraulic cutting device:

Input work piece length data, encoder measuring length, stop mill to cut off by hydraulic cutting device.

? ? 1. Mill line dimension: 9690×1200×1450（mm）

? ? 2. Running speed：About20m/Min.

? ? 3. Forming stands numbers：19+3=22

? ? 4. Roller steel brand: GCr15 (D2);

? ? 5. Roller hardness：HRC58o—62o

? ? 6. Shaft steel brand：1045

? ? 7. Shaft diameter：Φ70

??? 8. 212 Bearing: deep groove ball bearing 212

? ? 9. Rolling profiles：C80--300# Z120--300#

? ? 10. Motor power：22KW

? ? 11. Hydraulic motor mode: YLM16-3000